ASSEMBLIES
MTP Assemblies – Lite Linke offer a wide range of MTP assemblies. The MTP assemblies range from MTP Trunks, MTP Harness Links and MTP containment solutions.
MTP® Lite Trunk Cable Assemblies are of a lightweight single jacket construction, designed to optimise space saving of trunk patching. The 12f cable has a 3.2mm outer diameter while the 24f version being marginally larger at 3.8mm. These compact cables are packed with Kevlar® which provides the necessary endurance for routing and patching purposes, though best used within a Comms Room or Data Suite environment.
MTP® Tuff Trunk Cable Assemblies are of a Robust Double Jacket construction, designed for longer length trunk patching. Incredibly, the provision of a second jacket benefits the cable by an additional 500N of crush resistance to an overall total of 1000N. The cables retain their compactness with only 4.7mm O.D for 12f and 5.4mm for the 24f version. These cables are packed with Kevlar® which provides the necessary endurance for routing and patching purposes, providing links between Comms Rooms or Data Centres.
MTP® Multi-Lite Trunk assemblies are a neat solution for providing up to four MTP®-MTP® links within a compact, high density ruggedised cable. The cable construction consists of four ruggedized 12f tubes over-sheathed with a LSZH jacket. Two layers of Kevlar® form the reinforcement and provide ample mechanical resistance beyond expected installation handling.
MTP® Multi-Tuff Trunk assemblies offer exceptional fibre counts from 48f up to 144f, all contained within one robust trunk link assembly. Typical configurations of up to 12x 12f MTP® to 12x 12f MTP® or 6x 24f MTP® to 6x 24f MTP® assemblies can be provided. The Multi-Tuff trunk provides exceptional durability when compared to traditional MTP® trunk cable, with a crush resistance of 2000N and tensile strength in excess of 1500N.
Ruggedised Harnesses or Fan-outs, as they’re sometimes known, allow the direct connection between MTP® adapters and other connector types. Typical use for these assemblies is for QSFP 40G SR4 connectivity where the break-out units split into 8x fibres or 4x 10G channels and are interoperable between differing QFSP manufacturers.
Utilising the feature packed LC HD Switchable Uni-boot connector on your assemblies offers the most efficient use of rack space. Combining two fibres into a single round 3mm jacket can save up to half the patching cable space while the disconnection latch makes for easy removal of the assembly without disturbing the neighbouring ports.